Eclipse V6-3.0L SOHC (2003)
YES: Go to Step 13.
NO: Go to Step 11.
STEP 11. Check power window main switch connector E-12 for damage.
Q: Is power window main switch connector E-12 in good condition?
YES: Go to Step 12.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the power windows work normally.
STEP 12. Check the wiring harness between power window main switch E-12 (terminal 9) and ground.
NOTE: Also check intermediate connector C-91. If intermediate connectors C-91 is damaged, repair or replace the connector as described in Harness
Connector Inspection.