mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2159 > < Initial Inspection and Diagnostic Overview|Page 2157
Page 95
background image

TECHNICAL DESCRIPTION (COMMENT)

The power window main switch or the front power window motor (LH) may be defective.

TROUBLESHOOTING HINTS

-

Malfunction of power window main switch

-

Malfunction of front power window motor (LH)

-

Damaged harness wires or connectors

DIAGNOSIS

Required Special Tool:

-

MB991223: Harness Set

STEP 1. Check the power window main switch.

1. Remove the power window main switch. Refer to Door - Door Trim and Waterproof Film.

2. Check continuity while power window main switch is moved to "UP" and "DOWN" position.

Q: Is the power window main switch in good condition?

YES: Go to Step 2.

NO: Replace the power window main switch. When the power window main switch is operated, the front power window (LH) should open
and close normally.

STEP 2. Check the front power window motor (LH).

1. Remove the front power window motor (LH). Refer to Door - Door Glass and Regulator.

Initial Inspection and Diagnostic Overview|Page 2159 > < Initial Inspection and Diagnostic Overview|Page 2157