Eclipse V6-3.0L SOHC (2003)
STEP 4. Check the wiring harness between power window main switch connector E-12 (terminals 1 and 5) and front power window motor
(LH) connector E-11 (terminals 1 and 2).
Q: Is the wiring harness between power window main switch connector E-12 (terminals 1 and 5) and front power window motor (LH) connector E-11
(terminals 1 and 2) in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. When the power window main switch is operated, the front power window (LH) should open and close normally.
Inspection Procedure D-4
Power Window: Only Power Window (RH) Does Not Work By Operating Power Window Sub-switch.
