mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2169 > < Initial Inspection and Diagnostic Overview|Page 2167
Page 105
background image

STEP 9. Check power window main switch connector E-12 and front power window sub-switch (RH) connector E-05 for damage.

Q: Are power window main switch connector E-12 and power window sub-switch connector E-05 in good condition?

YES: Go to Step 10.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. When the power window sub-switch is operated, the power window
(RH) should open or close normally.

Initial Inspection and Diagnostic Overview|Page 2169 > < Initial Inspection and Diagnostic Overview|Page 2167