Eclipse V6-3.0L SOHC (2003)
STEP 10. Check the wiring harness between power window main switch connector E-12 (terminal 7) and power window sub-switch connector
E-05 (terminal 8).
NOTE: Also check intermediate connectors C-91 and C-95. If intermediate connectors C-91 or C-95 is damaged, repair or replace the connector as
described in Harness Connector Inspection.
Q: Is the wiring harness between power window main switch connector E-12 (terminal 7) and power sub-switch connector E-05 (terminal 8) in good
condition?
YES: Replace the power window main switch. When the power window sub-switch is operated, the power window (RH) should open or close
normally.
NO: Repair the wiring harness. When the power window sub-switch is operated, the power window (RH) should open or close normally.
STEP 11. Measure at power window sub switch connector E-05 in order to check the ground circuit to the power window sub switch.
