Eclipse V6-3.0L SOHC (2003)
NO: Repair or replace the connector. Refer to Harness Connector Inspection. When the power window sub-switch is operated, the power window
(RH) should open or close normally.
STEP 15. Check the wiring harness between power window sub-switch connector E-05 (terminals 4 and 6) and front power window motor
(RH) connector E-04 (terminals 2 and 1).
Q: Is the wiring harness between front power window main switch (RH) connector E-05 (terminals 4 and 6) and front power window motor (RH)
connector E-04 (terminals 2 and 1) in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. When the power window sub-switch is operated, the power window (RH) should open or close normally.
Inspection Procedure D-5
Power Window: Door Window (RH) Does Not Work By Operating Power Window Main Switch.
