Eclipse V6-3.0L SOHC (2003)
Sunroof Motor Assembly Power Supply Circuit Part 2
CIRCUIT OPERATION
-
The sunroof motor assembly is energized through fusible link 5 by the battery.
-
When the ignition switch (IG2) signal is on, the sunroof motor assembly is ready to operate.
TROUBLESHOOTING HINTS
-
Malfunction of the sunroof switch
-
Malfunction of the sunroof motor assembly
-
Damaged harness wires or connectors
DIAGNOSIS
Required Special Tool:
-
MB991223: Test Harness Set
STEP 1. Check the sunroof motor assembly power supply circuit [fusible link (5)] at the sunroof motor assembly connector D-06 by
backprobing.
1. Do not disconnect the sunroof motor assembly connector D-06.
