mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2205 > < Initial Inspection and Diagnostic Overview|Page 2203
Page 141
background image

STEP 3. Check the windshield wiper motor.

1. Disconnect windshield wiper motor connector A-03.
2. Connect a battery to the windshield wiper motor as shown. Then check the windshield wiper motor operates normally at high and low speeds.

Q: Does the windshield wiper motor operate normally?

YES: Go to Step 4.

NO: Replace the windshield wiper motor. Check that the windshield wiper works normally.

STEP 4. Check at windshield wiper motor connector A-03 to check the windshield wiper motor ground circuit.

1. Disconnect windshield wiper motor connector A-03, and measure at the wiring harness side.

Initial Inspection and Diagnostic Overview|Page 2205 > < Initial Inspection and Diagnostic Overview|Page 2203