mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2213 > < Initial Inspection and Diagnostic Overview|Page 2211
Page 149
background image

STEP 2. Check the windshield wiper motor.

1. Disconnect windshield wiper motor connector A-03.
2. Connect a battery to the windshield wiper motor as shown. Then check the windshield wiper motor operates normally at high and low speeds.

Q: Does the windshield wiper motor operate normally?

YES: Go to Step 3.

NO: Replace the windshield wiper motor. Check that the windshield wiper operates normally when the windshield wiper switch is moved to
each position.

Initial Inspection and Diagnostic Overview|Page 2213 > < Initial Inspection and Diagnostic Overview|Page 2211