mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2214 > < Initial Inspection and Diagnostic Overview|Page 2212
Page 150
background image

STEP 3. Check windshield wiper motor connector A-03 and front-ECU connector A-11X for damage.

Q: Are windshield wiper motor connector A-03 and front-ECU connector A-11X in good condition?

YES: Go to Step 4.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the windshield wiper operates normally when the windshield
wiper switch is moved to each position.

Initial Inspection and Diagnostic Overview|Page 2214 > < Initial Inspection and Diagnostic Overview|Page 2212