Eclipse V6-3.0L SOHC (2003)
STEP 4. Check the wiring harness between windshield wiper motor connector A-03 (terminals 3 and 4) and front-ECU connector A-11X
(terminals 27 and 28).
NOTE: Also check intermediate connector C-06. If intermediate connectors C-06 is damaged, repair or replace the connector as described in Harness
Connector Inspection.
Q: Is the wiring harness between windshield wiper motor connector A-03 (terminals 3 and 4) and front-ECU connector A-11X (terminals 27 and 28) in
good condition?
YES: No action to be taken.
NO: Repair the wiring harness. Check that the windshield wiper operates normally when the windshield wiper switch is moved to each position.
Inspection Procedure G-4
Windshield Wiper And Washer: Windshield Wiper Does Not Stop At The Predetermined Park Position.