mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2225 > < Initial Inspection and Diagnostic Overview|Page 2223
Page 161
background image

3. Check that normal conditions are displayed on the items described in the table.

NOTE:  Also check that the wiper interval changes smoothly when the vehicle is accelerated from 0 km/h (0 mph) to 25 km/h (15.5 mph).

Q: Does the value change within the normal range when the windshield intermittent wiper interval adjusting knob is rotated?

YES: Replace the front-ECU. The windshield intermittent wiper interval should change according to the vehicle speed.

NO: Replace the ETACS-ECU. The windshield intermittent wiper interval should change according to the vehicle speed.

Inspection Procedure G-7

Windshield Wiper And Washer: Windshield Washer Does Not Work.

NOTE:  This troubleshooting requires use of scan tool MB991502 and SWS monitor kit MB991862. For details of how to use the SWS monitor, refer
to "How to use SWS monitor."

Initial Inspection and Diagnostic Overview|Page 2225 > < Initial Inspection and Diagnostic Overview|Page 2223