Eclipse V6-3.0L SOHC (2003)
Q: Does the scan tool display the items "FRONT WASH.SW" and "FRONT ECU ACK" as normal condition?
YES: Go to Step 4.
NO:
-
The scan tool does not show the respective normal condition for item "FRONT WASH. SW." Replace the column switch. Check that the
windshield washer works normally.
-
The scan tool does not show the respective normal condition for item "FRONT ECU SW." Replace the front-ECU. Check that the windshield
washer works normally.
STEP 4. Check the windshield washer motor.
1. Disconnect windshield washer motor connector A-33, and check at windshield washer motor connector side.
2. Fill the windshield washer tank with washer fluid.
3. When battery voltage is applied between terminals 1 and 2, washer fluid should gush out.
Q: Does the windshield washer motor operate normally?
YES: Go to Step 5.
NO: Replace the windshield washer motor. Check that the windshield washer works normally.
STEP 5. Check at windshield washer motor connector A-33 to check the windshield washer motor ground circuit.
1. Disconnect windshield washer motor connector A-33, and measure at the wiring harness side.
