Eclipse V6-3.0L SOHC (2003)
2. Measure the resistance value between terminal 2 and ground.
-
The measured value should be 2 ohm or less.
Q: Does the measured resistance value correspond with this range?
YES: Go to Step 8.
NO: Go to Step 6.
STEP 6. Check windshield washer motor connector A-33 for damage.
Q: Is windshield washer motor connector A-33 in good condition?
YES: Go to Step 7.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the windshield washer works normally.
STEP 7. Check the wiring harness between windshield washer motor connector A-33 (terminal 2) and ground.
Q: Is the wiring harness between windshield washer motor connector A-33 (terminal 2) and ground in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. Check that the windshield washer works normally.