mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2246 > < Initial Inspection and Diagnostic Overview|Page 2244
Page 182
background image

STEP 6. Check the wiring harness between rear washer motor connector A-34 (terminal 2) and ground.

Q: Is the wiring harness between rear washer motor connector A-34 (terminal 2) and ground in good condition?

YES: No action to be taken.

NO: Repair the wiring harness. Check that the rear washer works normally.

STEP 7. Check rear washer motor connector A-34 and ETACS-ECU connector C-117 for damage.

Q: Are rear washer motor connector A-34 and ETACS-ECU connector C-117 in good condition?

YES: Go to Step 8.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the rear washer works normally.

Initial Inspection and Diagnostic Overview|Page 2246 > < Initial Inspection and Diagnostic Overview|Page 2244