Eclipse V6-3.0L SOHC (2003)
3. Measure the voltage between terminal 52 and ground.
-
The measured value should be approximately 12 volts (battery positive voltage).
Q: Does the measured voltage correspond with this range?
YES: Go to Step 10.
NO: Go to Step 8.
STEP 8. Check combination meter connector C-41 for damage.
Q: Is combination meter connector C-41 in good condition?
YES: Go to Step 9.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the seat belt warning light illuminates normally.
