Eclipse V6-3.0L SOHC (2003)
NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the seat belt warning light illuminates normally.
STEP 11. Check the wiring harness between combination meter connector C-42 (terminal 27) and ETACS-ECU connector C-118 (terminal 73).
Q: Is the wiring harness between combination meter connector C-42 (terminal 27) and ETACS-ECU connector C-118 (terminal 73) in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. Check that the seat belt warning light illuminates normally.
Inspection Procedure J-1
Headlight, Tail Light: Tail Lights Does Not Illuminate Normally.
NOTE: This troubleshooting requires use of scan tool MB991502 and SWS monitor kit MB991862. For details of how to use the SWS monitor, refer
to "How to use SWS monitor."