mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2273 > < Initial Inspection and Diagnostic Overview|Page 2271
Page 209
background image

STEP 3. Check the wiring harness between front combination light (LH) connector A-26 (terminal 3) and front-ECU connector A-10X
(terminal 8).

NOTE:  Also check joint connector C-77 and intermediate connector C-89. If joint connector C-77 or intermediate connector C-89 is damaged, repair or
replace the connector as described in Harness connector Inspection.

Q: Is the wiring harness between front combination light (LH) connector A-26 (terminal 3) and front-ECU connector A-10X (terminal 8) in good
condition?

YES: No action to be taken.

NO: Repair the wiring harness. The position light (LH), the tail light (LH), the side marker light (LH) and the license plate lights should illuminate
normally.

Initial Inspection and Diagnostic Overview|Page 2273 > < Initial Inspection and Diagnostic Overview|Page 2271