mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2278 > < Initial Inspection and Diagnostic Overview|Page 2276
Page 214
background image

STEP 9. Check the wiring harness between rear combination light (LH) connector F-17 (terminal 2) and front-ECU connector A-10X (terminal
8).

NOTE:  Also check joint connector C-77 and intermediate connectors C-89 or C-90. If joint connector C-77 or intermediate connectors C-89 and C-90
is damaged, repair or replace the connector as described in Harness connector Inspection.

Q: Is the wiring harness between rear combination light (LH) connector F-17 and front-ECU connector A-10X in good condition?

YES: No action to be taken.

NO: Repair the wiring harness. The tail light (LH), side marker light (LH) and the license plate lights should illuminate normally.

Initial Inspection and Diagnostic Overview|Page 2278 > < Initial Inspection and Diagnostic Overview|Page 2276