Eclipse V6-3.0L SOHC (2003)
STEP 15. Check the wiring harness between front combination light (LH) connector A-26 (terminal 2) and ground.
Q: Is the wiring harness between front combination light (LH) connector A-26 (terminal 2) and ground in good condition?
YES: Replace the position light socket (LH). Check that the position light (LH) illuminates normally.
NO: Repair the wiring harness. Check that the position light (LH) illuminates normally.
STEP 16. Check front combination light (LH) connector A-26 and front-ECU connector A-10X for damage.
Q: Are front combination light (LH) connector A-26 and front-ECU connector A-10X in good condition?
YES: Go to Step 17.
NO: Repair or replace the connector. Refer to Harness connector Inspection. The tail light (LH, incorporated in rear combination light) and the side
marker light (LH) should illuminate normally. Check that the position light (LH) illuminates normally.
