Eclipse V6-3.0L SOHC (2003)
STEP 23. Check the wiring harness between position light (RH) connector A-32 (terminal 3) and front-ECU connector A-10X(terminal 8).
NOTE: Also check intermediate connectors C-06 and C-89. If intermediate connector C-06 or C-89 is damaged, repair or replace the connector as
described in Harness connector Inspection.
Q: Is the wiring harness between position light (RH) connector A-32 (terminal 3) and front-ECU connector A-10X (terminal 8) in good condition?
YES: Replace the front combination light socket (RH). Check that the position light (LH) illuminates normally.
NO: Repair the wiring harness. Check that the position light (LH) illuminates normally.
STEP 24. Check the stop/tail light bulb (LH).
1. Remove the stop/tail light bulb (LH).
2. Check that the stop/tail light bulb (LH) is not broken.
