mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2290 > < Initial Inspection and Diagnostic Overview|Page 2288
Page 226
background image

STEP 29. Check the wiring harness between rear combination light (LH) connector F-17 (terminal 2) and front-ECU connector A-10X
(terminal 8).

NOTE:  Also check joint connector C-77 and intermediate connectors C-89 and C-90. If joint connector C-77 or intermediate connectors C-89 or C-90
is damaged, repair or replace the connector as described in Harness connector Inspection.

Initial Inspection and Diagnostic Overview|Page 2290 > < Initial Inspection and Diagnostic Overview|Page 2288