mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2292 > < Initial Inspection and Diagnostic Overview|Page 2290
Page 228
background image

YES: Go to Step 34.

NO: Go to Step 32.

STEP 32. Check rear combination light (RH) connector F-09 for damage.

Q: Is rear combination light (RH) connector F-09 in good condition?

YES: Go to Step 33.

NO: Repair or replace the connector. Refer to Harness connector Inspection. Check that the tail light (RH) illuminates normally.

STEP 33. Check the wiring harness between rear combination light (RH) connector F-09 (terminal 5) and ground.

Initial Inspection and Diagnostic Overview|Page 2292 > < Initial Inspection and Diagnostic Overview|Page 2290