mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2300 > < Initial Inspection and Diagnostic Overview|Page 2298
Page 236
background image

YES: Go to Step 46.

NO: Go to Step 44.

STEP 44. Check rear side marker light (RH) connector F-11 for damage.

Q: Is rear side marker light (RH) connector F-11 in good condition?

YES: Go to Step 45.

NO: Repair or replace the connector. Refer to Harness connector Inspection. Check that the rear side marker light (RH) illuminate normally.

STEP 45. Check the wiring harness between rear side marker light (RH) connector F-11 (terminal 1) and ground.

Initial Inspection and Diagnostic Overview|Page 2300 > < Initial Inspection and Diagnostic Overview|Page 2298