mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2301 > < Initial Inspection and Diagnostic Overview|Page 2299
Page 237
background image

Q: Is the wiring harness between rear side marker light (RH) connector F-11 (terminal 1) and ground in good condition?

YES: Replace the rear side marker light socket (RH). Check that the rear side marker light (RH) illuminate normally.

NO: Repair the wiring harness. Check that the rear side marker light (RH) illuminate normally.

STEP 46. Check rear side marker light (RH) connector F-11 and front-ECU connector A-10X for damage.

Q: Are rear side marker light (RH) connector F-11 and front-ECU connector A-10X in good condition?

YES: Go to Step 47.

NO: Repair or replace the connector. Refer to Harness connector Inspection. Check that the rear side marker light (RH) illuminate normally.

Initial Inspection and Diagnostic Overview|Page 2301 > < Initial Inspection and Diagnostic Overview|Page 2299