mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2305 > < Initial Inspection and Diagnostic Overview|Page 2303
Page 241
background image

NOTE:  Also check intermediate connector F-14. If intermediate connector F-14 is damaged, repair or replace the connector as described in Harness
connector Inspection.

Q: Is the wiring harness between license plate light connector F-15 (terminal 1) and ground in good condition?

YES: Replace the license plate light socket. Check that the license plate light illuminate normally.

NO: Repair the wiring harness. Check that the license plate light illuminate normally.

STEP 52. Check license plate light connector F-15 and front-ECU connector A-10X for damage.

Q: Are license plate light connector F-15 and front-ECU connector A-10X in good condition?

YES: Go to Step 53.

NO: Repair or replace the connector. Refer to Harness connector Inspection. Check that the license plate light illuminate normally.

Initial Inspection and Diagnostic Overview|Page 2305 > < Initial Inspection and Diagnostic Overview|Page 2303