mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2311 > < Initial Inspection and Diagnostic Overview|Page 2309
Page 247
background image

STEP 7. Check the wiring harness between headlight (RH) connector A-35 (terminal 2) and ground.

Q: Is the wiring harness between headlight (RH) connector A-35 (terminal 2) and ground in good condition?

YES: No action to be taken.

NO: Repair the wiring harness. Check that the headlights illuminate normally.

STEP 8. Check headlight (LH) bulb.

1. Remove the headlight (LH) bulb.
2. Check that the headlight (LH) bulb is not broken.

Q: Is headlight (LH) bulb normal?

YES: Go to Step 9.

NO: Replace the headlight bulb (LH). Check that the headlights illuminate normally.

STEP 9. Check headlight (LH) connector A-24 and front-ECU connector A-10X for damage.

Q: Are headlight (LH) connector A-24 and front-ECU connector A-10X in good condition?

YES: Go to Step 10.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the headlights illuminate normally.

Initial Inspection and Diagnostic Overview|Page 2311 > < Initial Inspection and Diagnostic Overview|Page 2309