Eclipse V6-3.0L SOHC (2003)
STEP 10. Check the wiring harness between daytime running light-ECU connector A-38 (terminal 2) and the ignition switch (IG2).
NOTE: Also check intermediate connector C-89, junction block connectors C-111 and C-112 for loose, corroded, or damaged terminals, or terminals
pushed back in the connector. If intermediate connector C-89, junction block connector C-111 or C-112 is damaged, repair or replace the damaged
components) as described in Harness Connector Inspection.
Q: Is the wiring harness between daytime running light-ECU connector A-38 (terminal 2) and the ignition switch (IG2) in good condition?
YES: No action is necessary and testing is complete.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. The daytime running light function should now work normally.
