Eclipse V6-3.0L SOHC (2003)
Daytime Running Light Power Supply Circuit
TECHNICAL DESCRIPTION (COMMENT)
If the wiring harness between daytime running light-ECU connector (terminal 5) and front-ECU connector (terminal 2) is defective when switching the
headlight to high-beam, both the headlight (high-beam) and the headlight (low-beam in a reduced state) light up.
TROUBLESHOOTING HINTS
-
The daytime running light-ECU may be defective
-
The wiring harness or connectors may have loose, corroded, or damaged terminals, or terminals pushed back in the connector
DIAGNOSIS
Required Special Tool:
-
MB991223: Harness Set
