mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2349 > < Initial Inspection and Diagnostic Overview|Page 2347
Page 285
background image

STEP 6. Check front combination light (LH) connector A-26 and ETACS-ECU connector C-119 for damage.

Q: Are front combination light (LH) connector A-26 and ETACS-ECU connector C-119 in good condition?

YES: Go to Step 7.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the turn-signal lights illuminate normally.

Initial Inspection and Diagnostic Overview|Page 2349 > < Initial Inspection and Diagnostic Overview|Page 2347