mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2359 > < Initial Inspection and Diagnostic Overview|Page 2357
Page 295
background image

STEP 23. Check the wiring harness between rear combination light (RH) connector F-09 (terminal 5) and ground.

Q: Is the wiring harness between rear combination light (RH) connector F-09 (terminal 5) and ground in good condition?

YES: Replace the rear combination light socket assembly (RH). Check that the turn-signal lights illuminate normally.

NO: Repair the wiring harness. Check that the turn-signal lights illuminate normally.

Initial Inspection and Diagnostic Overview|Page 2359 > < Initial Inspection and Diagnostic Overview|Page 2357