Eclipse V6-3.0L SOHC (2003)
STEP 25. Check the wiring harness between rear combination light (RH) connector F-09 (terminal 1) and ETACS-ECU connector C-119
(terminal 9).
NOTE: Also check junction block connector C-101. If junction block connector C-101 is damaged, repair or replace the connector as described in
Harness Connector Inspection.
Q: Is the wiring harness between rear combination light (RH) connector F-09 (terminal 1) and ETACS-ECU connector C-119 (terminal 9) in good
condition?
YES: Replace the rear combination light socket assembly (RH). Check that the turn-signal lights illuminate normally.
NO: Repair the wiring harness. Check that the turn-signal lights illuminate normally.
STEP 26. Check combination meter connector C-41 and ETACS-ECU connector C-119 for damage.
Q: Are combination meter connector C-41 and ETACS-ECU connector C-119 in good condition?
YES: Go to Step 27.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the turn-signal lights illuminate normally.