Eclipse V6-3.0L SOHC (2003)
STEP 27. Check the wiring harness between combination meter connector C-41 (terminal 48) and ETACS-ECU connector C-119 (terminal 14).
NOTE: Also check junction block connector C-108. If junction block connector C-108 is damaged, repair or replace the connector as described in
Harness Connector Inspection.
Q: Is the wiring harness between combination meter connector C-41 (terminal 48) and ETACS-ECU connector C-119 (terminal 14) in good condition?
YES: Replace the combination meter. Check that the turn-signal lights illuminate normally.
NO: Repair the wiring harness. Check that the turn-signal lights illuminate normally.
