Eclipse V6-3.0L SOHC (2003)
STEP 28. Check combination meter connector C-43 and ETACS-ECU connector C-119 for damage.
Q: Are combination meter connector C-43 and ETACS-ECU connector C-119 in good condition?
YES: Go to Step 29.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the turn-signal lights illuminate normally.
STEP 29. Check the wiring harness between combination meter connector C-43 (terminal 14) and ETACS-ECU connector C-119 (terminal 9).
NOTE: Also check junction block connector C-108. If junction block connector C-108 is damaged, repair or replace the connector as described in
Harness Connector Inspection.
Q: Is the wiring harness between combination meter connector C-43 (terminal 14) and ETACS-ECU connector C-119 (terminal 9) in good condition?