mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2368 > < Initial Inspection and Diagnostic Overview|Page 2366
Page 304
background image

STEP 3. Check the fog light relay.

Q: Is the fog light relay in good condition?

YES: Go to Step 4.

NO: Replace the fog light relay. Check that the fog lights illuminate normally.

STEP 4. Measure at fog light relay connector A-04X in order to the battery power supply to the fog light relay.

1. Disconnect fog light relay connector A-04X, and measure at the relay box side.

Initial Inspection and Diagnostic Overview|Page 2368 > < Initial Inspection and Diagnostic Overview|Page 2366