mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2370 > < Initial Inspection and Diagnostic Overview|Page 2368
Page 306
background image

STEP 7. Check fog light relay connector A-04X and front-ECU connector A-10X for damage.

Q: Are fog light relay connector A-04X and front-ECU connector A-10X in good condition?

YES: Go to Step 8.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the fog lights illuminate normally.

STEP 8. Check the wiring harness between fog light relay connector A-04X (terminal 3) and front-ECU connector A-10X (terminal 1).

Q: Is the wiring harness between fog light relay connector A-04X (terminal 3) and front-ECU connector A-10X (terminal 1) in good condition?

YES: Go to Step 9.

NO: Repair the wiring harness. Check that the fog lights illuminate normally.

Initial Inspection and Diagnostic Overview|Page 2370 > < Initial Inspection and Diagnostic Overview|Page 2368