mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2377 > < Initial Inspection and Diagnostic Overview|Page 2375
Page 313
background image

STEP 5. Check the wiring harness between fog light (LH) connector A-28 (terminal 2) and ground.

Q: Is the wiring harness between fog light (LH) connector A-28 (terminal 2) and ground in good condition?

YES: No action to be taken.

NO: Repair the wiring harness. Check that the fog lights illuminate normally.

STEP 6. Check fog light relay connector A-04X and fog light (LH) connector A-28 for damage.

Q: Are fog light relay connector A-04X and fog light (LH) connector A-28 in good condition?

YES: Go to Step 7.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the fog lights illuminate normally.

Initial Inspection and Diagnostic Overview|Page 2377 > < Initial Inspection and Diagnostic Overview|Page 2375