Eclipse V6-3.0L SOHC (2003)
STEP 7. Check the wiring harness between fog light relay connector A-04X (terminal 4) and fog light (LH) connector A-28 (terminal 1).
Q: Is the wiring harness between fog light relay connector A-04X (terminal 4) and fog light (LH) connector A-28 (terminal 1) in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. Check that the fog lights illuminate normally.
STEP 8. Check the fog light bulb (RH).
1. Remove the fog light bulb (RH).
2. Check that the fog light bulb (RH) is not broken.
Q: Is the fog light bulb (RH) in good condition?
YES: Go to Step 9.
NO: Replace the fog light bulb (RH). Check that the fog lights illuminate normally.
STEP 9. Measure at fog light (RH) connector A-31 in order to check the ground circuit to the fog light (RH).
1. Disconnect fog light (RH) connector A-31, and measure at the wiring harness side.