mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2390 > < Initial Inspection and Diagnostic Overview|Page 2388
Page 326
background image

STEP 1. Check which of the dome light, the luggage compartment light <ECLIPSE> or the trunk light <ECLIPSE SPYDER> does not
illuminate normally.

Q: Which of the dome light, the luggage compartment light <ECLIPSE> or the trunk light <ECLIPSE SPYDER> fail to illuminate normally?

dome light does not illuminate normally : Go to Step 2.
luggage compartment light <ECLIPSE> : Go to Step 11.
trunk light <ECLIPSE SPYDER> : Go to Step 18.

STEP 2. Check the dome light bulb.

Q: Is the dome light bulb in good condition?

YES: Go to Step 3.

NO: Replace the bulb. Check that the dome light illuminates normally.

STEP 3. Measure at dome light connector D-04 <ECLIPSE-vehicles without sunroof>, D-03 <ECLIPSE-vehicles with sunroof, without vanity
mirror light and ECLIPSE SPYDER> or D-25 <ECLIPSE-vehicles with sunroof and vanity mirror light> in order to check the ETACS-ECU
line of the power supply to the dome light.

1. Disconnect dome light connector D-04 <ECLIPSE-vehicles without sunroof> or D-03 <ECLIPSE-vehicles with sunroof, without vanity mirror

light and ECLIPSE SPYDER> or D-25 <ECLIPSE-vehicles with sunroof and vanity mirror light>, and measure at the wiring harness side.

Initial Inspection and Diagnostic Overview|Page 2390 > < Initial Inspection and Diagnostic Overview|Page 2388