mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2391 > < Initial Inspection and Diagnostic Overview|Page 2389
Page 327
background image

2. Measure the voltage between terminal 3 <ECLIPSE-vehicles without sunroof>, 7 <ECLIPSE-vehicles with sunroof and ECLIPSE SPYDER> and

ground.
-

The measured value should be approximately 12 volts (battery positive voltage).

Q: Does the measured voltage correspond with this range?

YES: Go to Step 6.

NO: Go to Step 4.

Initial Inspection and Diagnostic Overview|Page 2391 > < Initial Inspection and Diagnostic Overview|Page 2389