Eclipse V6-3.0L SOHC (2003)
STEP 5. Check the wiring harness between dome light connector D-04 (terminal 3) <ECLIPSE-vehicles without sunroof>, D-03 (terminal 7)
<ECLIPSE-vehicles with sunroof, without vanity mirror light and ECLIPSE SPYDER> or D-25 (terminal 7) <ECLIPSE-vehicles with sunroof
and vanity mirror light> and ETACS-ECU connector C-119 (terminal 6).
NOTE: Also check junction block connector C-102. If junction block connector C-102 is damaged, repair or replace the connector as described in
Harness Connector Inspection.
Q: Is the wiring harness between dome light connector D-04 (terminal 3) <ECLIPSE-vehicles without sunroof>, D-03 (terminal 7) <ECLIPSE-vehicles
with sunroof, without vanity mirror light and ECLIPSE SPYDER> or D-25 (terminal 7) <ECLIPSE-vehicles with sunroof and vanity mirror light> and
ETACS-ECU connector C-119 (terminal 6) in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. Check that the dome light illuminates normally.
STEP 6. Measure at dome light connector D-04 <ECLIPSE-vehicles without sunroof>, D-03 <ECLIPSE-vehicles with sunroof, without vanity
mirror light and ECLIPSE SPYDER> or D-25 <ECLIPSE-vehicles with sunroof and vanity mirror light> in order to check the ground circuit
to the dome light.
