Eclipse V6-3.0L SOHC (2003)
-
The measured value should be 2 ohm or less.
Q: Does the measured resistance value correspond with this range?
YES: Go to Step 9.
NO: Go to Step 7.
STEP 7. Check dome light connectors D-04 <ECLIPSE-vehicles without sunroof>, D-03 <ECLIPSE-vehicles with sunroof, without vanity
mirror light and ECLIPSE SPYDER> or D-25 <ECLIPSE-vehicles with sunroof and vanity mirror light> for damage.
Q: Are dome light connector D-04 <ECLIPSE-vehicles without sunroof>, D-03 <ECLIPSE-vehicles with sunroof, without vanity mirror light and
ECLIPSE SPYDER> or D-25 <ECLIPSE-vehicles with sunroof and vanity mirror light> in good condition?
YES: Go to Step 8.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the dome light illuminates normally.
