mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2397 > < Initial Inspection and Diagnostic Overview|Page 2395
Page 333
background image

STEP 9. Check dome light connectors D-04 <ECLIPSE-vehicles without sunroof>, D-03 <ECLIPSE-vehicles with sunroof, without vanity
mirror light and ECLIPSE SPYDER> or D-25 <ECLIPSE-vehicles with sunroof and vanity mirror light> and ETACS-ECU connector C-119
for damage.

Q: Are dome light connector D-04 <ECLIPSE-vehicles without sunroof>, D-03 <ECLIPSE-vehicles with sunroof, without vanity mirror light and
ECLIPSE SPYDER> or D-25 <ECLIPSE-vehicles with sunroof and vanity mirror light> and ETACS-ECU connector C-119 in good condition?

YES: Go to Step 10.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the dome light illuminates normally.

Initial Inspection and Diagnostic Overview|Page 2397 > < Initial Inspection and Diagnostic Overview|Page 2395