Eclipse V6-3.0L SOHC (2003)
STEP 16. Check the wiring harness between luggage compartment light connector F-21 (terminal 2) and ETACS-ECU connector C-118
(terminal 52).
NOTE: Also check intermediate connector C-90. If intermediate connector C-90 is damaged, repair or replace the connector as described in Harness
Connector Inspection.
Q: Is the wiring harness between luggage compartment light connector F-21 (terminal 2) and ETACS-ECU connector C-118 (terminal 52) in good
condition?
YES: Go to Step 17.
NO: Repair the wiring harness. Check that the luggage compartment lights illuminate normally.
STEP 17. Check the input signal (by using the Pulse Check).
Check the input signal of the liftgate latch switch <vehicles with theft-alarm system> or liftgate light switch <vehicles without theft-alarm system>.
CAUTION: To prevent damage to scan tool MB991502, always turn the ignition switch to the "LOCK" (OFF) position before connecting or
disconnecting scan tool MB991502.
