mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2425 > < Initial Inspection and Diagnostic Overview|Page 2423
Page 361
background image

When the theft-alarm system is triggered, the ETACS-ECU sounds the theft-alarm horn and all the vehicle horns.

TECHNICAL DESCRIPTION (COMMENT)

If the theft-alarm horn and the vehicle horns do not sound when the theft-alarm system is triggered, the ETACS-ECU may be defective.

TROUBLESHOOTING HINTS

-

Malfunction of the theft-alarm horn

-

Malfunction of the horn

-

Malfunction of the theft-alarm horn relay

-

Malfunction of the horn relay

-

Malfunction of the ETACS-ECU

-

Damaged harness wires or connectors

DIAGNOSIS

Required Special Tool:

-

MB991223: Test Harness Set

STEP 1. Check which horn is defective.

Check which horn does not sound when the theft-alarm system is triggered.

Q: Which horn does not sound?

Theft-alarm horn : Go to Step 2.
horn : Go to Step 12.
theft-alarm horn and all vehicle horns : Replace the ETACS-ECU. All the vehicle horn (including the theft-alarm horn) should sound when the
theft-alarm system is triggered.

STEP 2. Check the theft-alarm horn.

1. Remove the horn.

2. Connect the battery as shown, and check that the theft-alarm horn sounds.

Q: Does the theft-alarm horn sound?

YES: Go to Step 3.

NO: Replace the theft-alarm horn. All the vehicle horn (including the theft-alarm horn) should sound when the theft-alarm system is triggered.

Initial Inspection and Diagnostic Overview|Page 2425 > < Initial Inspection and Diagnostic Overview|Page 2423