Eclipse V6-3.0L SOHC (2003)
STEP 10. Check the wiring harness between theft-alarm horn relay connector A-06X (terminal 3) and ETACS-ECU connector C-117 (terminal
40).
NOTE: Also check intermediate connector C-89. If intermediate connector C-89 is damaged, repair or replace the connector as described in Harness
Connector Inspection.
Q: Is the wiring harness between theft-alarm horn relay connector A-06X (terminal 3) and ETACS-ECU connector C-117 (terminal 40) in good
condition?
YES: Go to Step 11.
NO: Repair the wiring harness. All the vehicle horn (including the theft-alarm horn) should sound when the theft-alarm system is triggered.
STEP 11. Check the fit of the theft-alarm horn.
