mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2434 > < Initial Inspection and Diagnostic Overview|Page 2432
Page 370
background image

STEP 17. Check the wiring harness between horn relay connector A-05X (terminal 4) and horn connector A-27 (terminal 1).

Q: Is the wiring harness between horn relay connector A-05X (terminal 4) and horn connector A-27 (terminal 1) in good condition?

YES: Go to Step 18.

NO: Repair the wiring harness. All the vehicle horn (including the theft-alarm horn) should sound when the theft-alarm system is triggered.

STEP 18. Check rear horn relay connector A-05X and ETACS-ECU connector C-117 for damage.

Q: Are horn relay connector A-05X and ETACS-ECU connector C-117 in good condition?

YES: Go to Step 19.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. All the vehicle horn (including the theft-alarm horn) should sound when

Initial Inspection and Diagnostic Overview|Page 2434 > < Initial Inspection and Diagnostic Overview|Page 2432