mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2435 > < Initial Inspection and Diagnostic Overview|Page 2433
Page 371
background image

the theft-alarm system is triggered.

STEP 19. Check the wiring harness between horn relay connector A-05X (terminal 3) and ETACS-ECU connector C-117 (terminal 44).

NOTE:  Also check intermediate connector C-89. If intermediate connector C-89 is damaged, repair or replace the connector as described in Harness
Connector Inspection.

Q: Is the wiring harness between horn relay connector A-05X (terminal 3) and ETACS-ECU connector C-117 (terminal 44) in good condition?

YES: Replace the ETACS-ECU. All the vehicle horn (including the theft-alarm horn) should sound when the theft-alarm system is triggered.

NO: Repair the wiring harness. All the vehicle horn(including the theft-alarm horn) should sound when the theft-alarm system is triggered.

STEP 20. Check the horn.

Initial Inspection and Diagnostic Overview|Page 2435 > < Initial Inspection and Diagnostic Overview|Page 2433