Eclipse V6-3.0L SOHC (2003)
STEP 1. Check the fog light switch.
Remove the fog light switch.Then check continuity between the switch terminals.
Q: Is the fog light switch in good condition?
YES: Go to Step 2.
NO: Repair the fog light switch. If the for light switch operates normally, it indicates that a correct signal is sent from the fog light switch.
STEP 2. Measure at fog light switch connector C-76 in order to check the ground circuit to the fog light switch.
1. Disconnect fog light switch connector C-76, and measure at the wiring harness side.
