Eclipse V6-3.0L SOHC (2003)
STEP 4. Check the wiring harness between fog light switch connector C-76 (terminal 7) and ground.
NOTE: Also check joint connector C-78. If joint connector C-78 is damaged, repair or replace the connector as described in Harness Connector
Inspection.
Q: Is the wiring harness between fog light switch connector C-76 (terminal 7) and the ground in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. If the for light switch operates normally, it indicates that a correct signal is sent from the fog light switch.
STEP 5. Check fog light switch connector C-76 and ETACS-ECU connector C-118 for damage.
Q: Are fog light switch connector C-76 and ETACS-ECU connector C-118 in good condition?
YES: Go to Step 6.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. If the for light switch operates normally, it indicates that a correct signal
is sent from the fog light switch.